粉體行業在線展覽
粉體行業在線展覽
直接聯系
張家港市衛邦機械制造有限公司
江蘇張家港
2420
SMW-500型塑料磨粉機
該機是本廠用于自行研制的**型磨粉機，其特點如下：
1、與同類磨粉機相比，在同功率的情況下產量有較大提高（增產20%-50%）。節約能耗
2、增加了集塵裝置，有效地降低了粉塵污染。
3、主風機出料降低了操作工人的勞動強度。
4、主機門蓋可開，便于檢修和刀具的更換。
5、采用風水雙冷，較好的降低了機體內的工作溫度，所研制的料不易變性，同時也有利于熱敏性塑料的磨制，可對部分PE，ABS進行磨制。
The unit is an ideal equipment/of processing and milling thermal PVC, PE andiil, other plastics. Though 20-30% milling powder lis added intother processing formula, all physic chemistry charact eristics of its product keep the ones while using full new raw material. It is a necessary equipment of using waste material, reducing cost and improving economic efficiency.
The unit is an ideal equipment/of processing and milling thermal PVC,PE andill, other plastics. Though 20-30% milling powder lis added intother processing formula, all physic chemistry charract eristics of its product keep the ones while using full new raw material. It is a necessary equipment of using waste material, reducing cost and improving economic efficiency.
工作原理
1、該機工作部分為刀盤。高速粒子在撞擊齒板后部分被粉碎，經吸風抽出，而較大粒子則繼續撞擊，粉碎后被抽出。這樣減少了刀盤負荷，提高磨粉效率，又能使粉料得到均勻冷卻。
2、溫度低是該機的主要優點。按熱功當量：每小時作功后轉換為860千卡熱量。本機為外抽風。風量達50m/KW由進、出口風溫差，帶走大部分熱量。少部分熱量由水冷卻解決。要求冷水的進口溫度不大于25℃，出口水溫度不大于45℃，夏天適當增加冷卻水流，以降低溫度。
The unit is an ideal equipment/of processing and milling thermal PVC, PE andiil, other plastics. Though 20-30% milling powder lis added intother processing formula, all physic chemistry charact eristics of its product keep the ones while using full new raw material. It is a necessary equipment of using waste material, reducing cost and improving economic efficiency.
The unit is an ideal equipment/of processing and milling thermal PVC,PE andill, other plastics. Though 20-30% milling powder lis added intother processing formula, all physic chemistry charract eristics of its product keep the ones while using full new raw material. It is a necessary equipment of using waste material, reducing cost and improving economic efficiency.
主要技術參考Main Technical Parameter
刀盤數：1只，外徑：483mm±1 mm 赤板：1付12片（優質合金剛，硬度50°-58°）
刀片：24片（優質和金剛，硬度52-55） 主電機轉速：2950r/min
主電機功率：37KW。配用三角帶： B型，2007mm 引風機：型號9-19，4#，配用電動機3KW
關風機：型號ZGF，配用電動機0.75KW 產量：PVC20目300kg/h
外型尺寸：整套機器（長*寬*高）5900*1450*2900 整機重量：1200kg
用途：
本廠吸收國內外先進技術研制開發的系列磨粉機。用于硬度低到中等的PVC塑料，高密度PE，或其它塑料經過試磨成功的。經塑料制品專業工廠實踐操作證明，磨制粉料在加工回訪中加入20%-30%碳酸鈣，其制品的化學物理性能保持全新的各項指標不變而且產量可以達到300kg，因此，此設備是塑料制品廠降本節支，解決廢品積累的**設備。
This factory absorbs both domestic and abroad advanced technology to research and develop series of grinders.The PVC plastic for low to medium hardness,high density PE or other plastics succeed in trial grinding.It is evidenced by practices and operation of plastic manufacturing factories that the chemical and physical properties of the products can keep updated indexes unchanged and the output can be increased to 300kg if 20-30% calcium carbonate can be added in grinded materials during processing ,so this equipment is the optimal device of the plastic manufacturing factories to reduce this cost and solve waste accumulation.
SMW-500型磨盤式塑料磨粉機
