粉體行業在線展覽
粉體行業在線展覽
直接聯系
北京飛斯科科技有限公司
美國
面議
531
鎳鉻線加熱器是一段絕緣的鎳鉻線，兩端帶波紋式銅接頭，避免鎳鉻線焊接的不便。通常將線加熱器沿柱狀物纏繞，需要仔細地將整段加熱器進行熱沉，通常使用Stycast環氧樹脂來提供熱連接，尤其是在鎳鉻線加熱器的兩端需要很好的熱連接。鎳鉻線加熱器通常從中間對折固定，這樣即使在大電流流過時也不會產生強磁場。線加熱器有50歐姆和25歐姆兩種類型。
| Wire Heaters | Nichrome with heater kits |
| Power Output | 50Watts when used with a Cryo-con controller in the 50Watt mode:50V@1A 25Watts when used with a Cryo-con controller in the 25Watt mode:25V@1A |
| Resistance | 50Ohms ± 10% 25Ohms ± 10% |
| Length | 5' (152cm) 2.5' (76cm) |
| Wire | Material: Nichrome 80/20， 32AWG (0.203mm) Insulation: Polyimide， Thermal rating: 493K |
| Connector | Two piece， Gold over Copper |
| Ratings | Maximum operating temperature: 425K Maximum Current: 2.0A (With sufficient heat sinking) |
| Mounting | Wrap around cylinder， heat sink over entire length with Stycast™ Epoxy. |
